What Size Hog Ring For 3/8 Bungee

how to assemble bungee cord hooks with hog rings

Bungee cords are great for holding things tight. You tin can use them to secure things on the roof rack of your auto, strap the tarp of a truck or boat, or but go along things from falling. Bungee cords are also good for making tire chains for cars and trampoline for kids. Kayakers also use them to make anchor trolleys and deck lines for securing kayaking gear. In other words, there are a meg and 1 uses for bungee cords.

What is a bungee cord?

A bungee cord or stupor string is an elastic rope with a cloth sheath. It can have a hook associates on each cease for easy attachment. The hooks are either plastic or metal and are strong enough to withstand the tension on the cord. Furthermore, the assembly of the hook attachment must be stiff enough to continue the string from coming off. A foolproof way to secure the bungee hooks is to crimp the ends of the cord with a sus scrofa ring.

In this commodity, I provide a stride-by-step guide on how to securely install bungee cord hooks on a daze cord using hog rings and a pair of sus scrofa ring pliers.

How to secure bungee cord hook with hog rings

Tools and supplies

Hog ring pliers via Amazon
Hog band fasteners
Bungee cord
Bungee hook
Tape measure
Utility knife or hot knife
Needle nose pliers (optional)

Instructions

Footstep 1: Measure and cut the bungee cord to length. You tin use a utility knife or hot knife but get-go wrap where you want to cut with masking tape. A masking tape helps make a clean cutting. A hot knife cuts and seals and then yous won't need the second stride. Merely skin off the tape after cutting.

Footstep ii: Seal the ends of the cord to prevent fraying. Utilize a burn torch or lighter to fire the ends lightly and clasp with your fingers. Then remove the masking tape later on the end has cooled.

If you used a hot knife to cut, you lot don't need to fire the ends again. Your cord is already sealed. The hot knife cuts and seals the end of the shock cord.

Step 3: Insert the end of the shock cord through the hole of the bungee hook or carabiner. Expose plenty length for gripping. At least 5 inches is good. Just if you are making a big loop, you will demand plenty length to fold over.

Footstep iv: Set the hog ring onto the hog band pliers. Squealer ring pliers take a spring mechanism that keeps the band fastener from falling. The squealer band should be the same size as the bore of the stupor cord rope. For example, 1/4″ hog ring for ane/4″ bungee or 3/eight hog band for 3/8 bungee.

Step 5: Fold and crimp the cease of the bungee cord. Only fold like an inch or less. Hold it firmly with your hand or needle nose pliers and put the hog ring effectually it. In one case the ring is properly seated, crimp it with the sus scrofa ring pliers by squeezing the handles together. Printing until the pokes of the ring overlap. Rotate the knot between the jaws of the hogring pliers and continue pressing until it is nice and tight.

Step six: Pull back the excess length of the string so that the knot sits on the hook. Now you have a foolproof knot that volition keep the hook from always coming out unless it breaks or the cord snaps.

Well, there you take it. That is how to secure a carabiner hook to a bungee cord using hog rings. You lot can also use the ring fastener to secure a couple of chock cords together.

How to secure a hook to Bungee Cord using a Squealer Ring – Video

Frequently Asked Questions (FAQs)

How do you secure bungee cord ends to prevent fraying?

When you lot cut bungee cord, the ends may kickoff to fray. Fortunately, you can easily go on the stupor cord ends from fraying by either cutting with a hot pocketknife, burning the ends lightly with a fire torch, or applying a light coat of fray free textile stabilizer.
One of the best material stabilizer products is the Terial Magic fabric fray free stabilizer (via Amazon). It binds the cobweb of cloth together to foreclose unraveling. You can use information technology to secure the ends of your bungee cords if you lot don't know how to seal them with estrus.

What size hog band for 1/four bungee

The rule of thumb when finding the appropriate size of hog band for bungee is to use pig rings that are the aforementioned size as the shock string. For example, 1/4 hog ring for 1/iv bungee or 3/8 sus scrofa clip for 3/8 shock string. If y'all cannot find a matching size, choose the nearest pig ring size.